Steel edge, modular trench system in 4'', 8'' & 12'' internal width.
Heavy duty iron edged, modular trench system in 4'', 8'' & 12'' internal width.
Specialty commercial problem solving products. The products below can be used in a variety of applications with special installation or drainage requirements.
View Drain Case Studies
Other ACO Products
Power Drain Accessories
A complete trench drain solution requires more than just channels and grates. Correct solution of outlets to plumbing pipework (outlets through catch basins or direct pipe connection) plus closing caps at starts and ends of trench and other items such as pipe outlet connections, installation devices, strainers and foul air traps are all part of a complete system.
Read technical details in our Drain Catalog.
PowerLok - safety clip
PowerLok Safety Clip
If an installation requires extra security of the PowerLok lock down of the grates. The safety clip can be inserted once the PowerLok is engaged if the PowerLock is unlocked (the grates is not captive) the red safety clip cannot be inserted. The safety clip is molded in red plastic so a quick visual check is easily accomplished that confirms all of the PowerLok are engaged.
For areas of security or safety concerns the PowerLok safety clip provides a visual alert for PowerLok lockings.
Part Number - 10443
The safety clip push fits next to the locked PowerLok device. Safety clip sits flush with grate surface and grate cannot be unlocked.
To open PowerLok device the safety clip must be removed. If no red block visible the locking is not guaranteed, providing a visual alert that grates may not be locked.
End Cap/ Closing inlet-outlet cap
S100K -4" Sch 40
S200K - 4" + 6" Sch 40
S300K - 6" + 8" Sch 40
Closing cap - Fits all channels. Manufactured from black ABS to complement edge rail. Guides aid cutting to correct height. 4" bell end connection(S100K), 4" and 6" bell end connection (S200K), 6" and 8" bell end connection (S300K) to Schedule 40 pipe. Seal using PVC-ABS cement.
Part Number - 96824
Part Number - 96823
Part Number - 96827
Schedule 40 6" inlet/outlet caps - S100K only
Polymer concrete end cap complete with a galvanized or stainless steel edge rail. A 6" Sch 40 connector is cast into the polymer concrete end cap. Inlet caps connect to female end of channel, outlet caps connect to male end of channel.
SK1-304-6 6" Inlet cap Part Number - 96861
SK1-404-6 6" Inlet cap Part Number - 96863
SK1-304-6 6" Outlet cap Part Number - 96862
SK1-404-6 6" Outlet cap Part Number - 96864
Installation device & template
Installation devices are used to align channels to create a complete trench run. Once the installation is complete using these devices the concrete is poured around the device and channels. Installation devices allow a single concrete pour.
For 4" wide channels
For 8" wide channels
For 12" wide channels
Part Number - 97477
Part Number - 97478
Part Number - 97479
8" wide - 1 meter unit template
8" wide - 0.5 meter unit template
Oval to 6" Schedule 40 pipe connector - 100 run channels only
Oval to round polypropylene adapter for bottom drill-out on 4” polymer concrete channels. Schedule 40 6” plain end can be solvent welded to underground pipe system. Seal to channel using appropriate flexible sealant.
1. Oval to fit drill out to channel
2. Schedule 40 6" plain pipe
Part Number - 95140
Vertical outlet strainer - 4" bottom outlet only
Strainer for 4” vertical outlets, prevents large particles of debris flowing into underground pipe system and causing blockages.
1. Flexible prongs fit inside Schedule 40 4" pipe
2. Lip on both sides hangs strainer from base of channel
Part Number - 93488
Foul Air Trap (FAT) - 4" size only
A polypropylene foul air trap (FAT) that fits into front or side of in-line catch basins.The FAT is connected to the MDPE catch basins bottoms by means of Sch 40 female to female PVC couplings available from any plumbing retailer. Catch basin base, coupler and FAT are glued together.
1. 2" removable rubber plug for rodding access
2. Schedule 40 4" plain end pipe
3. Schedule 40 4" pipe
Inside catch basin - removable black rubber trap plug at top, 4" pipe outlet at bottom
Part Number - 90854
Tel: (520) 421-9988
Fax: (520) 421-9899
Tel: (440) 639-7230
Toll free: (800) 543-4764
Fax: (440) 639-7235
Toll free: (800) 543-4764
Fax: (803) 802-1063