ACO DRAIN

Catch Basin

4" (100mm) wide

8" (200mm) wide

12" (300mm) wide

Catch Basins

A catch basin is usually put at the point that the trench drain evacuates the water into the underground pipework. They can be placed at the end of the trench run, or at any point along the trench run - depending on the underground pipe location and the ground topography.

Read technical details in our Drain Catalog.

 

ACO Drain Catch Basins
ACO Drain Catch Basins

K900 Series

Point Catch Basin

ACO Drain Catch Basins

K620 Series

ACO Drain Catch Basins
ACO Drain Catch Basins
ACO Drain Catch Basins
ACO Drain Catch Basins

K630 Series

In line Catch Basin

ACO Drain In line Trash Buckets

In line trash buckets

fit the 900 series in line catch basin for the 4" and 8" systems.

ACO Drain Shallow Trash Buckets

Shallow trash bucket

fit the 620 series point catch basin and 900 series for 12" systems.

ACO Drain Deep Trash Buckets

Deep trash buckets

fit the 630 series point catch basin and 900 series for the 12" systems.

ACO Drain In line Trash Buckets

All trash buckets are supported within the polymer concrete top section.

View Case Studies

on Catch Basins

Catch Basins- to suit K100/ KS100

Catch Basins are available with integrally cast in galvanized (G) or stainless steel (S) edge rails. Grates are secured with removable QuickLok bars or DrainLok boltless locking.

28.45" (722.5mm)

K1-901G

K1-901S

29.11" (739.5mm)

K1-621G

K1-621S

41.11" (1044.3mm)

K1-631G

K1-631S

  •   4" (100mm) wide Trench Drain Catch Basin Parts List

    cb-k1-table

    Part No

    Weight - lbs

    K100

    KS100

    K1-901 In-line catch basin - 19.69” (0.5m)

    94608

    94609

    52.6

    Type 900 In-line plastic trash bucket

    01498

    1.1

    K1-621 catch basin - 19.69” (0.5m)

    94617

    94618

    55.8

    K1-631 catch basin - 19.69” (0.5m)

    94631

    94632

    65.8

    Type 600 Optional riser

    99902

    10.0

    Foul air trap - fits both 910 & 610 basins

    90854

    1.2

  •   4" (100mm) wide Trench Drain Catch Basin Supporting Documents

  •   4" (100mm) wide Catch Basin Installation Section Drawings

  •   FAT - Foul Air Trap Adapter - 4" pipe size only

    A polypropylene foul air trap (FAT) that fits into front or side of in-line catch basins.The FAT is connected to the MDPE catch basins bottoms by means of Sch 40 female to female PVC couplings available from any plumbing retailer. Catch basin base, coupler and FAT are glued together.

    1. 2" removable rubber plug for rodding access

    2. Schedule 40 4" plain end pipe

    3. Schedule 40 4" pipe

    Inside catch basin - removable black rubber trap plug at top, 4" pipe outlet at bottom

    Part Number - 90854

Catch Basins- to suit K200/ KS200

Catch Basins are available with integrally cast in galvanized (G) or stainless steel (S) edge rails. Grates are secured with removable QuickLok bars
or DrainLok boltless locking.

33.18" (842.7mm)

K2-902G

K2-902S

37.64" (956mm)

K2-621G

K2-621S

49.63" (1260.8mm)

K2-631G

K2-631S

  •   8" (200mm) wide Trench Drain Catch Basin Parts List

    cb-k2-table

    Part No

    Weight

    K200

    KS200

    lbs

    K2-902 In-line catch basin - 19.69” (0.5m)

    94611

    94612

    68.0

    Type 900 In-line plastic trash bucket

    01399

    1.2

    K2-621 catch basin - 19.69” (0.5m)

    94520

    94621

    91.0

    K2-631 catch basin - 19.69” (0.5m)

    94633

    94634

    101.0

    Type 600 Optional riser

    99902

    10.0

    Foul air trap - fits both 910 & 610 basins

    90854

    1.2

  •   8" (200mm) wide Trench Drain Catch Basin Supporting Documents

  •   8" (200mm) wide Catch Basin Installation Section Drawings

  •   FAT - Foul Air Trap - 4" pipe size only

    A polypropylene foul air trap (FAT) that fits into front or side of in-line catch basins.The FAT is connected to the MDPE catch basins bottoms by means of Sch 40 female to female PVC couplings available from any plumbing retailer. Catch basin base, coupler and FAT are glued together.

    1. 2" removable rubber plug for rodding access

    2. Schedule 40 4" plain end pipe

    3. Schedule 40 4" pipe

    Inside catch basin - removable black rubber trap plug at top, 4" pipe outlet at bottom

    Part Number - 90854

Catch Basins- to suit K300/ KS300

Catch Basins are available with integrally cast in galvanized (G) or stainless steel (S) edge rails. Grates are secured with removable QuickLok bars
or DrainLok boltless locking.

37.64" (956mm)

K3-903G

K3-903S

49.63" (1260.8mm)

K3-904G

K3-904S

  •   12" (300mm) wide Trench Drain Catch Basin Parts List

    cb-k3-table

    Part No

    Weight

    K300

    KS300

    lbs

    K3-903 In-line catch basin - 19.69” (0.5m)

    94614

    94615

    88.0

    K3-904 In-line catch basin - 19.69” (0.5m)

    94635

    94636

    98.0

    Type 600 Optional riser

    99902

    10.0

    Type 600 plastic trash bucket - short

    98653

    3.5

    Type 600 plastic trash bucket - deep

    98665

    4.0

    Foul air trap

    90854

    1.2

  •   12" (300mm) wide Trench Drain Catch Basin Supporting Documents

  •   12" (300mm) wide Catch Basin Installation Section Drawings

  •   FAT - Foul Air Trap - 4" pipe size only

    A polypropylene foul air trap (FAT) that fits into front or side of in-line catch basins.The FAT is connected to the MDPE catch basins bottoms by means of Sch 40 female to female PVC couplings available from any plumbing retailer. Catch basin base, coupler and FAT are glued together.

    1. 2" removable rubber plug for rodding access

    2. Schedule 40 4" plain end pipe

    3. Schedule 40 4" pipe

    Inside catch basin - removable black rubber trap plug at top, 4" pipe outlet at bottom

    Part Number - 90854